
UNOX Combi Oven Installation
SKU: UNO-Combi-Oven-Installation
All prices ex-GST
Unox Combi Oven Installation by an accredited installer to 50 kilometers of UNOX Australia or its designee office.
UNOX CHEFTOP & BAKERTOP COMPLETE INSTALLATION
UNOX’s Services include; Communicating the installation requirements/services to the customer, ensuring the site is prepared prior to installation. Once complete, the Installation is coordinated to both the technician and customer.
• Unpack and check all equipment, build stand, place oven and peel protective covering.
• Installation: providing services are in place as listed on the Installation Preparation document
• Connect oven to three phase power, water connection and test water for quality.
• Connection of outgoing services to waste.
• Installation and connection of internet kit.
• Connection and test connection to the Internet.
• Calibration of oven including all date and time settings and other requirements to UNOX standard.
The ovens will require the following services in place prior to installation information.
Extraction:
A commercial canopy is required at the point of installation of the ovens, this is particularly important for gas ovens as the fumes can be dangerous to the health of your staff if not properly extracted.
Water inlet:
A cold water connection should be located within 1 meter near to or at the point of installation. The tap should have a ¾ inch fitting and the pressure should be regulated to between 250 kpa – 600 kpa.
Waste:
A waste point should be installed behind the oven. (Please refer to the UNOX installation document). For the 20 AND 40 tray floor model ovens the waste will have to be an in ground tundish waste
Power Requirements:
You will need to have the appropriate power connections (isolation switches) installed within 1 meter of the installation point for the ovens to connect to. (please refer to the Spec Sheets).
It's recommended having your electrician check to ensure that no upgrades are necessary to your switchboard, cabling and isolations switches prior to the new ovens being installed.
Please note the oven comes standard with power cable only. The power cable does not come plugged but for an additional charge we can have the oven plugged for you. If you do not wish for the oven to be plugged then it can be hard wired to the power point.
Water Treatment:
If the chloride levels exceed the recommended tolerances of 25 parts/million. High levels of Chloride can cause corrosion in the oven if not treated with reverse osmosis filtration. The most economical solution is the BWT Compact RO system UXBA14-30, which will require a 10am plug. It is capable of producing up to 120L/hour of treated water, enough water for two stacked ovens or one single floor model oven.
Internet connection:
The MIND.Maps™ Plus model ovens come standard (excludes ONE model ovens) with Wi-Fi connection capabilities so you are able to connect to your local Wi-Fi network. By connecting the oven to the internet, will then allow you to register and qualify for the Long Life 4 warranty online. T & C apply. ONE model ovens have the option to purchase a wi-fi kit to be eligible for LL4.
LONG.Life4 Extended Warranty
UNOX offers you the possibility of extending the guarantee on spare parts - up to 4 years (Parts) or 10,000 hour’s usage and 2 year’s labour.
CHEFTOP and BAKERTOP MIND.Maps™ Plus ovens can be connected by WI-FI, Ethernet cable or 3G/4G service.
The UNOX oven must remain accessible for remote login by the UNOX Service team – Warranty conditions may be compromised if accessibility is not possible.
Any additional costs for the installation beyond those provided as part of the UNOX LONG.Life4 Extended Warranty Program is the responsibility of the customer including:
• Overtime travel or labour. Warranty work is to be undertaken during normal business working hours.
• Travel by UNOX service agent or its designee, beyond a fifty (50) km radius (one hundred (100) km round trip) of UNOX Australia or its designee’s office;
• Any work or costs associated with moving the equipment within 1 meter of the final installed location
• Special licensing or permits;
• Unpacking, un-crating and removal of packing material of UNOX equipment Unless engaging LL4.PLUS
Unox Combi Oven Installation by an accredited installer.
UNOX CHEFTOP & BAKERTOP COMPLETE INSTALLATION
UNOX’s Services include; Communicating the installation requirements/services to the customer, ensuring the site is prepared prior to installation. Once complete, the Installation is coordinated to both the technician and customer.
• Unpack and check all equipment, build stand, place oven and peel protective covering.
• Installation: providing services are in place as listed on the Installation Preparation document
• Connect oven to three phase power, water connection and test water for quality.
• Connection of outgoing services to waste.
• Installation and connection of internet kit.
• Connection and test connection to the Internet.
• Calibration of oven including all date and time settings and other requirements to UNOX standard.
The ovens will require the following services in place prior to installation information.
Extraction:
A commercial canopy is required at the point of installation of the ovens, this is particularly important for gas ovens as the fumes can be dangerous to the health of your staff if not properly extracted.
Water inlet:
A cold water connection should be located within 1 meter near to or at the point of installation. The tap should have a ¾ inch fitting and the pressure should be regulated to between 250 kpa – 600 kpa.
Waste:
A waste point should be installed behind the oven. (Please refer to the UNOX installation document). For the 20 AND 40 tray floor model ovens the waste will have to be an in ground tundish waste
Power Requirements:
You will need to have the appropriate power connections (isolation switches) installed within 1 meter of the installation point for the ovens to connect to. (please refer to the Spec Sheets).
It's recommended having your electrician check to ensure that no upgrades are necessary to your switchboard, cabling and isolations switches prior to the new ovens being installed.
Please note the oven comes standard with power cable only. The power cable does not come plugged but for an additional charge we can have the oven plugged for you. If you do not wish for the oven to be plugged then it can be hard wired to the power point.
Water Treatment:
If the chloride levels exceed the recommended tolerances of 25 parts/million. High levels of Chloride can cause corrosion in the oven if not treated with reverse osmosis filtration. The most economical solution is the BWT Compact RO system UXBA14-30, which will require a 10am plug. It is capable of producing up to 120L/hour of treated water, enough water for two stacked ovens or one single floor model oven.
Internet connection:
The MIND.Maps™ Plus model ovens come standard (excludes ONE model ovens) with Wi-Fi connection capabilities so you are able to connect to your local Wi-Fi network. By connecting the oven to the internet, will then allow you to register and qualify for the Long Life 4 warranty online. T & C apply. ONE model ovens have the option to purchase a wi-fi kit to be eligible for LL4.
LONG.Life4 Extended Warranty
UNOX offers you the possibility of extending the guarantee on spare parts - up to 4 years (Parts) or 10,000 hour’s usage and 2 year’s labour.
CHEFTOP and BAKERTOP MIND.Maps™ Plus ovens can be connected by WI-FI, Ethernet cable or 3G/4G service.
The UNOX oven must remain accessible for remote login by the UNOX Service team – Warranty conditions may be compromised if accessibility is not possible.
Any additional costs for the installation beyond those provided as part of the UNOX LONG.Life4 Extended Warranty Program is the responsibility of the customer including:
• Overtime travel or labour. Warranty work is to be undertaken during normal business working hours.
• Travel by UNOX service agent or its designee, beyond a fifty (50) km radius (one hundred (100) km round trip) of UNOX Australia or its designee’s office;
• Any work or costs associated with moving the equipment within 1 meter of the final installed location
• Special licensing or permits;
• Unpacking, un-crating and removal of packing material of UNOX equipment Unless engaging LL4.PLUS
Related Products
Coffee Machine Installation

EVEREO 900 XEEC-1013-EPR - Service Temperature Food Preserver 10 tray GN 1/1

EVEREO XEEC-0611-EPLS - The Hot Fridge 6 Trays GN 1/1

EVEREO XEEC-0611-EPRS - The Hot Fridge 6 Trays GN 1/1

EVEREO XEEC-1011-EPL - Service Temperature Food Preserver 10 tray GN 1/1

EVEREO XEEC-1011-EPR - Service Temperature Food Preserver 10 tray GN 1/1

EVEREO XEEC-1013-EPL - Service Temperature Food Preserver 10 tray GN 1/1

EVEREO XEEC-10HS-EPD - Service Temperature Food Preserver 10 tray 460 x 330

EVEREO XEEC-10HS-EPL - Service Temperature Food Preserver 10 tray 460 x 330

EVEREO XEEC-10HS-EPR - Service Temperature Food Preserver 10 tray 460 x 330

Unox Tailgate Curbside Freight
