Zanussi 392215 EVO900 - Gas Solid Top on Convection Oven w 2 Burners on Cupboard

Also known as “French Top”, this highly versatile unit enables high speed cooking at the centre with slow simmer to the outer edge. Comes as top only (requiring separate base) or with integrated gas static or convection ovens.

Features:

• Gas heated, 10.5 kW central burner, solid top.
• Durable cast iron cooking plate, easy to clean.
• The center of the plate can reach a maximum temperature of 500 °C while decreasing outwards.
• Central burner with optimized combustion, flame failure device and protected pilot light.
• Piezo ignition.
• Cupboard compartment for storage of pots, pans, sheet pans etc.
• Temperature gradients to satisfy different cooking needs, provided over the whole plate thanks to the temperature fine-tuning by zone.
• Various sizes of pans can be used at the same time due to large surface area with no intermediate sectors.
• Pans can easily be moved from one area to another without lifting.
• Base compartment consists of a convection oven, with ON/OFF switch between static and convection mode, positioned beneath the base plate. Oven chamber to have 2 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.
• Convection oven allows for simultaneous cooking on 2 levels thus reducing cooking times compared to standard static ovens (depending on food type).
• Oven thermostat adjustable from 120 °C to 280 °C.
• The 6 kW and one 10 kW high efficiency flower flame burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• • 60 mm burners with continuous power regulation from 1,5 to 6 kW.
• • 100 mm burners with continuous power regulation from 2.2 kW to 10 kW.
• Burners with optimized combustion.
• Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
• Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
• All major compartments located in front of unit for ease of maintenance.
• IPX5 water resistance certification.
• The special design of the control knob system guarantees against water infiltration.
• Unit is 900mm deep to give a larger working surface area.
• AISI 304 stainless steel worktop, 2mm thick.
• All exterior panels in Stainless Steel with Scotch Brite finishing.
• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.