Zanussi 392009 EVO900 - 4 Burner Gas Range on Convection Oven

36MJ gas open burners, integrated with gas or electric static ovens featuring a cast iron base and unique air/heat flow design, enabling natural convection. Cast iron, heavy duty open trivets, pressed one piece worktop, ergonomic operator oriented control knobs.

Features:

• Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.
• The four 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• 60 mm burners with continuous power regulation from 1,5 to 6 kW
• 100 mm burners with continuous power regulation from 2.2 kW to 10 kW
• Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
• Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
• Burners with optimized combustion.
• Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
• Protected pilot light.
• Base compartment consists of a convection oven, with ON/OFF switch between static and convection mode, positioned beneath the base plate. Oven chamber to have 2 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.
• Convection oven allows for simultaneous cooking on 2 levels thus reducing cooking times compared to standard static ovens (depending on food type).
• Oven thermostat adjustable from 120 °C to 280 °C.
• 40 mm thick oven door for heat insulation.
• The special design of the control knob system guarantees against water infiltration.
• IPX5 water protection.
• Pan supports in stainless steel.
• Unit is 900mm deep to give a larger working surface area.
• Delivered with upstand chimney, mandatory to be installed.
• All exterior panels in Stainless Steel with Scotch Brite finishing.
• AISI 304 stainless steel worktop, 2mm thick.
• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.