Industrial Kitchens
Back to Products
Zanussi 372023 EVO700 - 2 Frontal Zone Electric Induction Cooktop

Zanussi 372023 EVO700 - 2 Frontal Zone Electric Induction Cooktop

SKU: LUUS-372023

Zanussi 372023 EVO700 - 2 Frontal Zone Electric Induction Cooktop

Frontal 2 Zone (5kW each)

Electric Induction Cooktop with Rear Condiment Holder (6x1/9GN)

Dimensions: 800W x 700D x 250H mm

Weight: 67kg

Elec: 10KW, 20.2A, 3N

$14,175.00$18,900.00

Zanussi 372023 EVO700 - 2 Frontal Zone Electric Induction Cooktop

Features:

  • Glass ceramic cooking surface with 2 independently controlled induction zones with a power of 5 kW per zone.
  • Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
  • Suitable for countertop installation.
  • Almost the entire surface of the ceramic plate can be used without “dead” spots.
  • Indicating lamp for each zone located on control console.
  • Induction plates endowed with overheating safety device.
  • Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
  • Low heat dissipation to the kitchen.
  • The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
  • The well beneath the container support can be filled with ice to keep condiments cool and incorporates and overflow pipe for drainage.
  • IPX 4 water protection.
  • All exterior panels in Stainless Steel with Scotch Brite finishing.
  • One piece pressed 1.5 mm work top in Stainless steel.
  • Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.